UserFriendly Strip Comments


	The Daily Static UF Archives Register UF Membership Ad Free Site Postcards Community Geekfinder UFie Gear Advertise on UF Forum Rules & FAQ Username Password Create a New Account

Back to UserFriendly Strip Comments Index

&&^%$#@#$%^&ingstoopidthermostathousinggasket.	by themadkansan	2009-05-08 13:11:02
Leaking? Try a leather gasket instead of	by joecrouse	2009-05-08 13:40:26
Can't get it on straight.	by themadkansan	2009-05-08 13:54:14
Make? Model? Engine?	by SaylorA	2009-05-08 13:56:41
Quad4 SOHC.	by themadkansan	2009-05-08 14:03:27
Use RTV to glue the gasket to the housing	by turambar	2009-05-08 14:13:46
and then put a little RTV on the gasket/mounting faces before going to install it. If you don't want to use RTV then a little bit of vaseline or grease should do the trick... motor oil might even work. Just find something to hydro-lock the gasket onto the T-stat housing. I have had similar type situations where a little bit of water was sufficient to hold the seal I kept dropping in place; THAT was with a big flat rubber washer and a PVC compression fitting though, much different surface dynamic.
[ Reply ]
I do use sealer.	by themadkansan	2009-05-08 14:22:38

[Todays Cartoon Discussion] [News Index]

Come get yer ARS (Account Registration System) Source Code here!
All images, characters, content and text are copyrighted and trademarks of J.D. Frazer except where other ownership applies. Don't do bad things, we have lawyers.
UserFriendly.Org and its operators are not liable for comments or content posted by its visitors, and will cheerfully assist the lawful authorities in hunting down script-kiddies, spammers and other net scum. And if you're really bad, we'll call your mom. (We're not kidding, we've done it before.)