| Software RAID-1 problem |
by Kickstart |
2005-11-29 11:18:34 |
I've got two 160GB disks, using mdadm for two RAID1 mirrors (/dev/md0: /dev/sda1 & /dev/sdb1, /dev/md1: /dev/sda2 & /dev/sdb2)
/dev/md0 is to be mounted at /home, /dev/md1 is to be mounted on /var. Both /dev/md0 and /dev/md1 are formatted ext2.
During boot, I get the following:
mount: wrong fs type, bad option, bad superblock on /dev/md0
After booting without /home or /var (errors occur because of missing /var), I can run 'mdadm -A /dev/md0' and 'mdadm -A /dev/md1' and then mount /home and /var and use them normally.
What I want to do is figure out why this isn't a problem to do manually, and why this doesn't happen automatically at boot. Suggestions?
Thx,
KS |
|
[ Reply ] |
|
What does your fstab say? | by Tars_Tarkas | 2005-11-29 11:21:34 |
|
You have verified the the FS type in | by abaron | 2005-11-29 11:25:26 |
|
Yep, fstab is correct | by Kickstart | 2005-11-29 11:27:29 |
|
See if you can talk to Myke. He seems to have a | by classic_jon | 2005-11-29 12:32:08 |
|
Still not working... :( | by Kickstart | 2005-11-29 13:09:08 |
|
Tried using what /dev/sda1 points to? | by frause | 2005-11-29 13:21:33 |
|
Nope...real device: | by Kickstart | 2005-11-29 13:22:48 |
|
It does seem a bit weird, | by Tars_Tarkas | 2005-11-29 13:24:52 |
|
Ok, that worked for me for *something* | by frause | 2005-11-29 13:25:19 |
|
You said this was SATA right? | by abaron | 2005-11-29 13:39:45 |
|
Ain't that a kick in the nards. | by Kickstart | 2005-11-29 13:44:46 |
|
Damn! | by abaron | 2005-11-29 13:46:36 |
|
Sure thing... | by Kickstart | 2005-11-29 13:48:03 |
|
Richmond?! Only when I go to the airport | by abaron | 2005-11-29 13:53:03 |
|
Well, I can go elsewhere than Rmd | by Kickstart | 2005-11-29 14:28:12 |
|
Have transit pass, will travel. | by abaron | 2005-11-29 14:33:17 |
|
La Amorosa is up at Edmonds & 6th | by Kickstart | 2005-11-29 14:50:16 |
|
'k Check | by abaron | 2005-11-29 15:01:00 |
|
I'm the real hero here. | by MYKe | 2005-11-29 18:57:51 |
