UserFriendly Strip Comments


	The Daily Static UF Archives Register UF Membership Ad Free Site Postcards Community Geekfinder UFie Gear Advertise on UF Forum Rules & FAQ Username Password Create a New Account

Back to UserFriendly Strip Comments Index

The excrement has impacted	by AndyA	2005-03-22 19:06:01
upon the rotary air circulation device. I've spent the last two days trying to track down the cause of a unit dependent, temperature dependent lockup in the new product. It's a little hard to probe electronics when it has to be at -20 to cause the problem. Since 1) the product is due to launch in a month and 2) I'm the only EE on the project this has been rather high priority. Finally tracked it down, good news: Turns out that it's nothing to do with my design. Bad news: Looks like it's a total FUBAR inside the CPU we are using.
[ Reply ]
Ouch	by Egaeus	2005-03-22 19:11:21
Is the CPU marketed as working at that temp?	by Egaeus	2005-03-22 19:12:30
Yes, full industrial range, should work -40 to +85	by AndyA	2005-03-22 19:28:52
We had one of those last night.	by hieraco	2005-03-22 19:30:40
Well I used up about half a can of freeze spray	by AndyA	2005-03-22 19:36:44
And you have launch in 1 month?	by radiowave911	2005-03-22 19:54:12
We can hope.	by AndyA	2005-03-22 20:11:57
Ah suppliers can't work with them and can't torch	by techi870	2005-03-22 21:06:18

[Todays Cartoon Discussion] [News Index]

Come get yer ARS (Account Registration System) Source Code here!
All images, characters, content and text are copyrighted and trademarks of J.D. Frazer except where other ownership applies. Don't do bad things, we have lawyers.
UserFriendly.Org and its operators are not liable for comments or content posted by its visitors, and will cheerfully assist the lawful authorities in hunting down script-kiddies, spammers and other net scum. And if you're really bad, we'll call your mom. (We're not kidding, we've done it before.)