|
|
Back to UserFriendly Strip Comments Index
|
Linux (SuSE7.3) boot help | by Sieldan | 2003-02-09 11:19:10 |
| Forgive asking the flippin' obvious... |
by wheresthefish |
2003-02-09 11:45:39 |
but you did run lilo after editing lilo.conf didn't you?
For comparison porpoises here are my results from a SuSE 8.0 box:
hal9000:~ # cat /etc/lilo.conf
boot = /dev/hda
change-rules
reset
read-only
menu-scheme = Wg:kw:Wg:Wg
lba32
prompt
timeout = 80
message = /boot/message
image = /boot/vmlinuz
label = linux
root = /dev/hda3
initrd = /boot/initrd
image = /boot/vmlinuz.suse
label = failsafe
root = /dev/hda3
initrd = /boot/initrd.suse
append = "ide=nodma apm=off acpi=off"
optional
image = /boot/memtest.bin
label = memtest86
-----------------------------------------------------------------
hal9000:~ # fdisk -l
Disk /dev/hda: 64 heads, 63 sectors, 1023 cylinders
Units = cylinders of 4032 * 512 bytes
Device Boot Start End Blocks Id System
/dev/hda2 1 64 128992+ 82 Linux swap
/dev/hda3 * 65 1023 1933344 83 Linux
Disk /dev/hdb: 16 heads, 63 sectors, 39560 cylinders
Units = cylinders of 1008 * 512 bytes
Device Boot Start End Blocks Id System
/dev/hdb1 1 8323 4194760+ 83 Linux
/dev/hdb2 8324 39560 15743448 5 Extended
/dev/hdb5 8324 22887 7340224+ 83 Linux
/dev/hdb6 22888 39560 8403160+ 83 Linux
-----------------------------------------------------------------
hal9000:~ # cat /etc/fstab
/dev/hda3 / reiserfs defaults 1 2
/dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0
devpts /dev/pts devpts defaults 0 0
/dev/fd0 /media/floppy auto noauto,user,sync 0 0
proc /proc proc defaults 0 0
/dev/hda2 swap swap pri=42 0 0
|
|
[ Reply ] |
|
"Comparison porpoises?" | by Stavros | 2003-02-09 11:51:40 |
|
Yep, have ran LILO a few times | by Sieldan | 2003-02-09 12:02:27 |
|
What did running LILO return? (n/t) | by Kickstart | 2003-02-09 12:12:42 |
|
Running Lilo gives | by Sieldan | 2003-02-09 12:20:37 |
|
|
[Todays Cartoon Discussion]
[News Index]
|
|
